The Size Of Clear Film Cannot Be Detected - Canon iPF830 Series Basic Manual

iPF830 Series
The Media Take-up Sensor cord is not connected to the Right Media Take-up
Unit correctly.

The size of clear film cannot be detected

The size of clear film cannot be detected
Cause
The Platen is soiled with ink or other substances.
Basic Guide
Cause
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Remove the foreign object from the Media Take-up
Sensor path. Arrange the Basket Cloth and Basket
Rod so they do not interfere with the Media Take-
up Sensor.
Reconnect the Media Take-up Sensor cord as fol-
lows.
1.
Turn the printer off.
2.
Disconnect the Media Take-up Sensor cord
from the Right Media Take-up Unit and recon-
nect it firmly, all the way in.
3.
Turn the printer on.
(See "Using the Media Take-up
Unit.")
User's Guide
➔
If the Media Take-up Unit continues rotating, con-
tact your Canon dealer for assistance.
Corrective Action
P.47
➔
The size of clear film cannot be detected
Corrective Action
103