The Printer Stops During A Print Job - Canon iPF830 Series Basic Manual

An error message is shown on the Display Screen

The printer stops during a print job

The printer stops during a print job
An error message is shown on the Display Screen ........................................................................................ 106
The printer ejects blank, unprinted paper ...................................................................................................... 106
An error message is shown on the Display Screen
An error message is shown on the Display Screen
The last portion of roll paper was used during a print job, and paper
could not be advanced because the trailing edge is taped to the
roll.
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
The leading edge of the roll paper was cut
to straighten it.
The Printhead nozzles are clogged.
A print job was received from an incom-
patible printer driver.
The printer has received print data that in-
cludes HP RTL commands when Auto
Rotate is On in the Control Panel menu.
The printer is damaged.
106
Cause
Cause
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value
other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
Print a test pattern to check the nozzles and make sure the Printhead is in good condi-
tion for printing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try printing again.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.")
Contact your Canon dealer for assistance.
Corrective Action
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Loading and Printing on Rolls.")
Corrective Action
User's Guide
➔
User's Guide
➔
iPF830 Series
P.18
➔
User's Guide
➔
User's Guide
➔
User's Guide
➔
Basic Guide