Toshiba e-STUDIO170F Service Manual page 10

Super power saver mode:
This feature turns off virtually all power to minimize power consumption. Only the Sub-CPU remains
operation sensing for ringing signals, document insertion, or activation of the Power Save key.
Printer power saver mode:
Reduces power consumption by cutting off power for the heater during periods when printing is not
expected. The fast warm up time ensures the printer section will be ready before a full page of image
data can be received.
Reverse order print:
Reverse order print is available permitting multi-page receptions to stack to the correct order with page
one on top. This feature is automatically deactivated when residual memory becomes low.
Recovery transmission:
Documents that have gone through the redial count limit will not be cleared, but stored for a pro-
grammed period of time. Such documents can be recovered to be transmitted again.
F-code mailbox communication:
Bulletin board F-code mailbox transmissions using ITU-T standard protocol is possible. Permitting con-
fidential communications with any other similarity equipped facsimile made by TOSHIBA or some other
company.
High-speed high-resolution printer engine:
Utilizes a high-speed, high-resolution laser printer engine with a print speed of 17 ppm and an interpo-
lated a resolution of 600 dpi. By installing the optional paper tray, up to 500 sheets of recording paper
can be supplied.
User-friendly operation:
Using the large LCD display and the cross-shaped cursor keys (Menu Keys), menu item selection is
quick and easy. Frequently used functions are assigned to direct function access keys, to make com-
mon communication operations and programming operations much faster and easier.
e-STUDIO170F Introduction January 2005 © TOSHIBA TEC
1 - 4