(4)
Remove the one screw from the ground plate, and remove the ground plate.
(5)
Remove the one screw from the RX cover stopper, and remove the RX cover stopper.
(6)
Rotate the shaft holders on the both ends of the RX feed roller shaft until they can be released
from the guide of the RX cover. Then, lift the RX feed roller shaft to remove.
Shaft holder
e-STUDIO170F Removal/Replacement/Adjustment
RX cover stopper
Ground plate
Fig.8-39
RX feed roller shaft
Fig.8-40
8 - 28
Shaft holder
January 2005 © TOSHIBA TEC