Pba Block - Toshiba e-STUDIO170F Service Manual

Hide thumbs Also See for e-STUDIO170F:

Table of Contents

PBA Block

[ 1 ] NCU PBA

Before disassembling or reassembling, be sure to refer to

Remove the operation panel assembly. (Refer to

Remove the right side cover. (Refer to

Remove five screws from the main PBA cover, and pull out the main PBA cover.

A speaker and a battery cell are installed inside of the main PBA cover. Each harness of this

speaker and this battery cell is connected to the main PBA. Therefore do not pull the main PBA

cover strongly.

Disconnect the two connectors from the main PBA, and remove the main PBA cover.

e-STUDIO170F Removal/Replacement/Adjustment

P.8-1 "8.1 Before Disassembling or Reas-

P.8-3 "[ 1 ] Operation Panel Assembly")

P.8-5 "[ 2 ] Right Side Cover")

Main PBA cover

Show Quick Links

Table of Contents