Table of Contents
Advertisement
Both WGS3-2820 and WGS3-5220 are IP-based Layer 3 Gigabit Ethernet Switch; the WGS3-2820 provides 24-Port
10/100Mbps and 4 Gigabit TP/2 SFP combo interfaces. The WGS3-5220 provides 48-Port 10/100Mbps and 4 Gigabit TP/2 SFP
combo interfaces.
The four RJ-45 gigabit copper ports support 10/100/1000Mbps auto-MDI/MDI-X detection that can directly connect to any
Gigabit Ethernet Servers, Switches, L3 backbone with a straight Category 5/5e, 8-wire UTP cable.
The wire-speed switch engine provides up to 12.8 and 17.6 Gbps switch fabric for L2 and L3 IP routing capability. Up to 4K IP
subnet / L2 tagged VLAN are also available to segment the IP or MAC-based networks. IEEE 802.1D Spanning Tree, bridging,
Port mirroring and port trunking also support for optimal LAN connection and diagnose. IGMP snooping, filtering, helps to build
a multimedia networks like video-conference etc.
Designed to offer the guaranteed IP Layer 3 routing with RIP, OSPF and DVMRP support, the WGS3-2820 and WGS3-5220
empower the performance of pure IP-based network easier then ever.
1.1 Packet Contents
Thank you for purchasing PLANET 24/48-Port 10/100Mbps + 4Port Gigabit TP / 2 SFP Combo Layer 3 Managed Switch-
WGS3-2820 and WGS3-5220. Terms of "WGS3 LAYER 3 Switch" means the Switches mentioned titled in the cover page of
this User's manual, i.e.WGS3-2820 and WGS3-5220. In the following section, Terms with lower case "switch" means other
Ethernet switch devices.
Check the contents of your package for following parts:
▫
WGS3 Layer 3 Managed Switch x1
▫
CD-ROM user's manual x1
▫
Quick installation guide x1
▫
19" rack mounting kit x1
▫
Power cord x1
▫
Rubber feet x 4
▫
RS-232 Console x 1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
User's Manual of WGS3-2820/WGS3-5220
1. INTRODUCTION
19
Advertisement
Table of Contents
