Wheels, Tires; Removing The Front Wheel; Installing The Front Wheel - KTM Freeride E-SX Owner's Manual

14

WHEELS, TIRES

14.1

Removing the front wheel

14.2

Installing the front wheel

Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screw
–
Release screws
–
Press on screw
–
Remove screw
C00711-10
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of
the fork.
Info
Do not operate the front brake lever when the front wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
C00712-10
–
Remove spacers
C00734-10
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease the shaft seal rings
Long-life grease (
–
Insert the spacers.
C00734-11
p. 37)
p. 63)
p. 94)
p. 64)

by several rotations.

.
 to push the wheel spindle out of the axle clamp.

.

.

p. 119)
p. 49)

and contact surface of the spacers.
81