Table of Contents
Advertisement
Overview of the remote control
operation indicator
When the operation button is
pressed, this indicator blinks. When
the PC mode or cursor operation
mode is on, this indicator lights up.
See pages 33, 45.
select
This operates in the same way as
the left button on the computer
mouse. See pages 33, 45.
double click
This operates in the same way as
double clicking the left button on the
computer mouse. See pages 33, 45.
power
Use to turn the projector on or off
when MAIN POWER is on. To turn
the projector off, press this button
twice. See page 22.
focus / zoom
Use to change the mode of the
buttons, FOCUS or ZOOM. See
page 23.
expand
Use to expand the image. See page
34.
capture
Use to freeze the image. When the
PC card is inserted, you can record
the image. See page 36.
icon
Press to display the icon menu. See
page 33.
auto
Use to adjust the position of the
image. See page 23.
The operations of these buttons varies as follows depending on the modes selected:
$
$
$
$
$
Normal
Adjust FINE (-)
Select the setting
On Menu
item (Left)
Select the image
On PC
(Left)
card Menu
–
PinP
Expand different
EXPAND
area (Left)
12
DOUBLE
CLICK
POWER
FOCUS
/ZOOM
or
EXPAND
CAPTURE
ICON
%
%
%
%
%
Adjust FOCUS or
Adjust FINE(+)
ZOOM (-)
Set or select the
Select the setting
setting (Down)
item (Right)
Select the image
Select the image
(Down)
(Right)
Switch still pictures
–
(main or sub)
Expand different
Expand different
area (Down)
area (Right)
SELECT
CANCEL
START/STOP
SOURCE
MENU
ENTER
NATIVE
PinP
+
-
AUTO CURSOR
}
}
{
{
}
}
}
{
{
{
Adjust FOCUS or
ZOOM (+)
Set or select the
setting (Up)
Select the image
(Up)
Switch still pictures
(main or sub)
Expand different
area (Up)
cancel
This operates in the same way as
the right button on the computer
mouse. See pages 33, 45.
start/stop
Use to turn the PC control
mode or cursor operation mode
on or off. See pages 33, 45.
input source (input)
Use to select the input source
you wish to watch. See page 23.
menu, enter,
,
,
Used for MENU setting (see page
25), and used to make FOCUS,
ZOOM or FINE adjustments. See
the table as shown below.
PinP
Press to turn on the PinP
(Picture in Picture) image,
or to cancel it. See page 35.
native
Press to change the size of the
image to native or full screen. See
page 16.
adjust - / +
See the table as shown below.
cursor
Press to display the cursor. Also
used to change the mode of PC
control or cursor operation, when
the projector is connected to a
personal computer with RS-
232C. See pages 33, 45.
adjust -
adjust +
–
–
Select the
Select the
group (-)
group (+)
Recapture of the
Select the input
still picture
source of PinP
Set the expand
Set the expand
rate (-)
rate (+)
,
–
–
Advertisement
Table of Contents
