Normal Menu - Mitsubishi X100 Owner's Manual

Menu operation (continue)

NORMAL menu

The following adjustments to the projected image can be done in this menu.
HELP CONTRAST
0
NORMAL R / G / B
ENHANCED
POINTER
AUDIO
OPTION
QUIT
CONTRAST Adjusts the picture contrast. The contrast becomes higher as the number increases.
If you wish to select the color, select R/G/B and
press the ENTER button. (The R/G/B setting
menu will be displayed.) To exit the R/G/B setting
menu, select RETURN and press the ENTER
button. To switch back to the default condition,
select RESET and press the ENTER button.
BRIGHTNESS
Adjusts image brightness. The image becomes brighter as the number increases.
If you wish to select the color, select R / G / B and
press the ENTER button. (The R / G/ B setting
menu will be displayed.) To exit the R/G/B set-
ting menu, select RETURN and press the EN-
TER button. To switch back to the default condi-
tion, select RESET and press the ENTER button.
TINT
Adjusts the color intensity of the image (only
when NTSC or 4.43 NTSC is selected).
COLOR Adjusts the color balance in the image. The color balance of the image shifts green
as the number increases and shifts to purple as the number decreases (only when
NTSC, PAL, SECAM or 4.43 NTSC is selected).
For GAMMA CORRECTION, see page 27.
GAMMA
CORECTION
• To switch back to the default condition of NORMAL, select RESET and press the ENTER button.
• When selecting RESET, the buttons cannot be operated for 2 to 18 seconds.
26
BRIGHTNESS TINT COLOR GAMMA CORRECTION
0 0 0
R / G / B USER
RESET
BRIGHTNESS
R G B
CONTRAST
0 0 0
RETURN
R G B
0 0 0
RETURN
RESET
RESET