Table of Contents
Advertisement
Overview of the remote control
operation indicator
When the operation button is
pressed, this indicator blinks. It also
illuminates when the projector is in
the personal computer mode or
drawing mode which is able to have
a cursor operation. See pages 25, 38.
select
This operates in the same way as the
left button on the computer mouse. By
pressing this button during the drawing
mode can set the start and end point of
the figure. See pages 25, 38.
double click
This operates in the same way as
double clicking the left button on the
computer mouse. See pages 25, 38.
input source
(RGB, VIDEO, CARD)
Use to select the input source you wish to
watch. If this button is pressed during PinP
mode, the input signal of sub image will be
changed. See page 16.
menu
Press to display MENU selection bar.
Exit the menu system by pressing the
MENU button during displaying MENU
display. See page 18.
volume (-)
Press to turn the volume down. See the
table as shown below.
PinP
Press to turn on the PinP (Picture in
Picture) image, or to cancel it. See page 26.
expand
Use to expand the image.
card auto play
Press to start auto play function of the
PC CARD. See page 28.
PC card release
Press this button to be able to eject
PC card. Make sure to press this
button all the time to eject the PC
card. See page 27.
The operations of these buttons varies as follows depending on the modes selected:
$
$
$
$
$
Normal
Adjust FINE (-)
Select the setting
On Menu
item (Left)
Select previous
On PC
image (Left)
card Menu
Exchange the image
PinP
(main or sub)
Expand different
EXPAND
area (Left)
8
DOUBLE
CLICK
RGB
MENU
-
(VOL)
EXPAND
PC CARD
AUTO PLAY
See page 26.
%
%
%
%
%
Adjust FOCUS or
Adjust FINE(+)
ZOOM (-)
Set the setting
Select the setting
item (Right)
Select next
INDEX or FILE
image (Right)
Switch still pictures
Exchange the image
(main or sub)
(main or sub)
Expand different
Expand different
area (Down)
area (Right)
cancel
This operates in the same way as the
right button on the computer mouse.
If this button is pressed during
drawing mode, the figure will
diappear. See pages 25, 38.
SELECT
start/stop
Use to turn the PC control mode or
cursor operation mode on or off.
CANCEL
See pages 25, 38.
focus / zoom
Use to change FOCUS or ZOOM mode.
See page 17.
START/STOP
{, }, $, %
Used for MENU setting. See the
VIDEO
CARD
table as shown below.
FOCUS
enter/still
/ZOOM
Used for MENU setting. Also, use to
freeze the image. See pages 18 and 25.
ENTER
/STILL
volume (+)
Press to turn the volume up. See the
+
(VOL)
table as shown below.
cursor
PinP
CURSOR
Press to display the cursor. Also
used to change the mode of PC
AUTO
control or cursor operation, when
RELEASE
POSITION
the projector
personal computer with RS-232C.
POWER
See pages 25 and 38.
auto position
Use to adjust the position of Personal
computer image. See page 16.
power
Use to turn the projector on or off
when MAIN POWER is on. To
turn the projector off, press this
button twice. See page 22.
}
}
}
}
}
{
{
{
{
{
Adjust FOCUS or
ZOOM (+)
Set the setting
item
item
Select
Select
INDEX or FILE
Switch still pictures
(main or sub)
Expand different
area (Up)
is connected to a
– (VOL)
+ (VOL)
Volume down
Volume up
–
–
Select the
Select the
group (-)
group (+)
Recapture of the
Recapture of the
still picture
still picture
Set the expand
Set the expand
rate (-)
rate (+)
Advertisement
Table of Contents
