Table of Contents
Advertisement
PROBLEMS
The image
remains blurred.
Red, blue or green
dots are viewed on
the text of image.
The image is
distorted on the
screen and
noise is heard.
No sound is
heard.
Nothing is
displayed on
the PC monitor.
Warm air comes out
of the exhaust vents.
Adjustments cannot
be made.
52
CAUSE
• When you see the stationary image for a long time, it may remain on the screen if
you change the image. It is not a breakdown. The blurred image will disappear in a
few minutes.
• It is normal.
• The cable for connection with other
equipment is not plugged securely
into the terminal.
• The projector is installed too close to
other equipment.
• Volume is not turned up.
• Mute function on PCGC is on.
• Connection to other equipment is not
made correctly.
• The PC monitor is not turned on.
• This is typical of the LCD projector.
• The operation is incorrectly made due
to noise or interference.
POSSIBLE SOLUTIONS
• Plug the connecting cable securely into the
terminal. See pages 17-21.
• Install the projector far away from other
equipment.
• Turn up the volume.
• Cancel the mute function. See page 30.
• Check connections.
See page 21.
• Turn on the monitor.
• Reset the mode and try again.
Advertisement
Table of Contents
