Buttons And Functions Of Remote Control Unit - Mitsubishi VS-SH10U Setup And Installation Manual

1.5. Buttons and functions of remote control unit

Illumination Button
Press to turn ON/OFF the light of
the remote control unit. If the
remote control unit is not
operated for a certain period of
time, the illumination will
automatically be off.
Display Button
Press to display F/W version
information, etc.
Input Button
Press to select input signal.
A: Digital
B: N/A
VIDEO: Analog
Y/C: N/A
MENU1 Button
Press to display adjustment menu1.
MENU2 Button
Press to display adjustment menu2.
Test Button
Press to display test patterns.
Press once for adjustment white.
Press twice for crosshatch.
Press 3 times for blue 180.
Press 4 times for gray 30.
Press 5 times for full-bit white.
Normal Button
Press to reset the adjusted data, etc.
Number Buttons
Press to select the adjustment
memory and to set remote ID, etc.
VS-SH10U Set-up and Installation Manual
POWER
ON
OFF
DISPLAY PIC
INPUT
A B Y/C
VIDEO
MENU1MENU2
MEM LIST
CRT
R G
B
TEST FUNC
ESC
NORMAL ENTER
1 2 3 4 5
6 7 8 9 0
MITSUBISHI
13
Wired Remote Control Terminal
Connect REMOCON jack here
for wired control.
Remote Control Transmitter
Direct this side to the set.
Power Button
Press to turn ON/OFF the main
power.
PIC MUTE Button
Press to turn ON/OFF the picture
mute.
MEM LIST Button
Press to select the adjustment
memory.
R/G/B Button
Press to select the color for
adjustment and to turn ON/OFF
the monochrome picture mute.
FUNC Button
Press for expanded functions.
ESC Button
Press to return to the prior
display during the menu mode.
Enter Button
Press to select and enter the item
during the menu mode.
UP/DOWN/RIGHT/LEFT Button
Press to move on the adjustment
menu and to change the
adjustment values.