Frymaster EH1721 Installation & Operation Manual page 21

6.4 USING THE BOIL-OUT FEATURE:
a. To program the fryer for boil-out, press the
Code will appear in the left display.
Switch .
b. Enter the code number 1 6 5 3. The right display will read boil. The temperature is
automatically set for 195ºF (91ºC). The fryer will attain this temperature and remain there
until the Power Switch is pressed, which cancels the
boil-out mode. In high-altitude locations, the fryer must
be monitored constantly for boil-over conditions. If boil-
over occurs, turn off the fryer immediately, allow it to
cool, then re-enter the boil-out mode to continue the boil-
out process.
6.5 FRYER RECOVERY TIME CHECK
FEATURE
a. The computer automatically checks the recovery time
each time the frypot temperature drops below 250ºF (121ºC). To check recovery time, press
the Program Mode Switch. Code will appear in the left display.
b. Enter the code number 1 6 5 2 on the number keypad. The recovery time will appear in both
displays for 5 seconds.
6.6 SELECTING FAHRENHEIT– CELSIUS DISPLAY MODE
a. The computer can display temperatures in either Fahrenheit or Celsius. To change from one to
the other, press the
b. Enter the code number 1 6 5 8 on the number keypad. The computer will toggle the
temperature display from Celsius to Fahrenheit or from Fahrenheit to Celsius.
c. Press the Temperature Check/ Program Lock Switch
newly selected mode.
6.6 SELECTING FRYPOT TEMPERATURE DISPLAY MODE
a. To display the actual frypot temperature at all times, press the
Code will appear in the left display.
b. Enter code 1 6 5 L in both number keypads. The computer will display the actual frypot
temperature.
NOTE: During the product cooking process, the cooking time will not be displayed, but
timing is taking place.
c. To return to setpoint display, repeat Steps 1 and 2.
Program Mode Switch.
20
Power Switch followed by the Program Mode
Before using the Boil-Out Mode,
ensure the frypot is filled with a
mixture of cold water and Frymaster
Fryer 'N' Griddle cleaner of
Code will appear in the left display.
to display the temperature in the
Program Mode Switch.
CAUTION
detergent.