EverFocus PARAGON 264x1 User Manual page 72

Cross-over Ethernet Cable Pin outs:
The Figure below shows the pin configurations for a cross-over cable.
Connection Procedure:
The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never
made a cross-over cable. Please remember you can not use a straight-through network cable for this application.
Once you have a cross-over cable, plug one end into the LAN port on the back of the DVR and the other into the
network card's connector (LAN port) on the back of the computer.
Log into the EverFocus DVR menu and go to the Network Setting Menu.
You must use the Static IP option for this type of connection.
Assign a Static IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of 192.168.001.001.
You can ignore the DNS Server settings.
The next step is to set the computer's network settings to match those of the DVR. On a Windows machine, you
will need Administrator privileges to do this.
To assign a Static (fixed) IP address in Windows 2000/XP, do the following :
65