Daylight Saving; User - EverFocus PARAGON 264x1 User Manual

5.9.2 Daylight Saving

Daylight Saving: Check the box to enable automatic
daylight saving time adjustment.
Start Date: Set the start date for daylight saving time.
Start Time (hh:mm): Set the time when daylight saving
time begins.
Set To (hh:mm): This is what the time will change to when
daylight saving begins. For most regions, this will be
one hour ahead of the "Start Time".
End Date: Set the end date for daylight saving time.
End Time (hh:mm): Set the time when daylight saving time ends.
The time change difference on the End Date will be the same as the difference between the Start Time and End Time
entered for the Start Date (typically 1 hour as in the example shown).

5.9.3 User

Here you can add or delete different login IDs on the
system as well as set access levels. See the charts below
for a listing of the rights associated with each access level.
Add: Click "Add" button to add a new user. Set the name
(case-sensitive), password, access level and status. Press
"Add" button to confirm a new user or "Cancel" to exit
without making changes.
Edit: Click "Edit" button to make changes to an existing
user account. Press "Save" button to save changes or
"Cancel" to exit without making changes.
User Login: Check this box to require user login for menu access from the front panel. When this is disabled, no username
or password is required to access the system from the front panel/mouse, and all users will be able to operate with ADMIN
rights from the front panel/mouse.
Auto Logoff: Check this box to automatically log off the current front panel user after 3 minutes of inactivity.
There are three system access levels. The charts below show the rights of each level.
Main Menu of the DVR
RIGHT
Playback
PTZ
Layout
Channel
Display
User Level and Rights
ADMINISTRATOR MANAGER
OK
OK
OK
OK
OK
OPERATOR
OK NO
OK NO
OK OK
OK OK
OK OK
57