Video Adjust; Motion - EverFocus PARAGON 264x1 User Manual

responding to an event at any given moment. In the example above, with 225 CIF FPS allocated and 255 CIF FPS
remaining, it would be possible to increase the FPS rate on the two 4 CIF cameras from 10 FPS to 15 FPS and also
increase the resolution and rate of the five 2 CIF cameras to 4 CIF and 15 FPS, with 15 CIF equivalent FPS still available to
be assigned to one or more of the nine CIF resolution cameras. If not all cameras experience event reaction triggers
simultaneously, greater resolution and/or FPS increases are possible for individual cameras, as long as the net total of 480
CIF equivalents is not exceeded.
Record Audio: Check this box to include the camera feed's audio data in the recording.
PTZ ID: When using a PTZ Camera, in order to control the camera's PTZ functions via the DVR, this ID must match the
RS-485 ID used by the connected camera. Click "On" to enter the ID number. Click "Off" to cancel PTZ control for this
camera.
Apply To: This button can be used to copy the selected camera's
recording settings to other cameras. Select which camera(s) you wish to
copy to. "Select All" selects all cameras, "Unselect All" deselects all
cameras. Click "OK" to copy the settings or "Cancel" to exit without
copying.

5.2.2 Video Adjust

Camera: Select the camera you wish to adjust. "Title" will
change to the name of the selected camera.
Brightness: Adjusts how bright/dark the picture appears. If
details appear to be lost in the shadows or darker regions, try
increasing the Brightness. If the image appears too saturated
or if the colors appear overwhelmed by glare, try decreasing
the Brightness.
Contrast: Adjusts the total amount of light output from the
display. If details are lost or lines appear distorted, try
decreasing the contrast.
Color: Adjusts the amount of color information in the picture.
Apply To: This button can be used to copy the video settings to other cameras. Select which cameras you wish to copy to.
"Select All" selects all cameras, "Unselect All" deselects all cameras. Click "OK" to copy the settings or "Cancel" to exit
without copying.

5.2.3 Motion

Camera: Select the camera you wish to configure. The "Title"
field will change to display the name of the selected camera.
Enable: Check this box to enable motion detection. Other
motion options will not be available unless this box is checked.
Log: Check this box to record motion events in the log.
Main Monitor: Main monitor display options when a motion
event occurs.
No change: No change on the main monitor display.
Full Screen: If this camera experiences a motion event, its
32