EverFocus PARAGON 264x1 User Manual page 36

Time: This sets the current time of the DVR.
Record Mode: Choose from these options ...
------------------: Each camera keeps its own, individual recording settings.
Normal+Event: All cameras will be set up for Normal recording (continuous recording until recording is switched off by
the user) and Event recording.
Event Only: All cameras will only record when Event reactions are triggered.
Schedule Rec: All cameras will only record according to a configurable schedule.
For the two Event recording options, enter the estimated number of hours per day that events will be recorded.
Resolution: Select the recording resolution for all the cameras (based on the video format).
NTSC: 704x480 / 704x240 / 352x240
PAL: 704x576 / 704x288 / 352x288
Record With:
------------------: All cameras will keep their individual settings.
Preset Settings: Select a preset setting for recording quality. Available options will be shown in a dropdown box below
this menu item, namely Best Quality, Standard, and Extended Record. For more details, please refer to APPENDIX B:
RECORDING VALUE SELECTION RULES.
Recording Days: (Not available if the "Schedule Record" box has been checked in the Record & Play > Record menu.)
Use this option if you want to set the maximum number of days during which the DVR should record footage from all the
cameras. The DVR will auto adjust relative settings (like recording quality, etc.) for all the cameras to fit all the footage
from the selected number of recording days into the available storage space. Available options will be shown in a
dropdown box below this menu item, namely 1, 3, 5, 7, 14, 20, 30, 40, 50 and 60 days. For more details, please refer to
APPENDIX B: RECORDING VALUE SELECTION RULES
Network Type:
Static IP: The user enters a static IP address for network connections.
DHCP: The DHCP server in the LAN will automatically assign an IP address for network connections.
PPPoE: This is for a direct DSL connection ONLY (no router). Check with your ISP to see if it uses PPPoE. For this
connection type, you will need to have an ISP-assigned username and password.
IP Address: This field shows the current IP Address for the DVR. If a Static/Fixed IP address is used, then this value must
be set manually. If DHCP or PPPoE is selected, this value will be assigned automatically.
29