Table of Contents
Advertisement
5.3.3 Play
Quick Playback: Check this box to enable the Quick
Playback function as described below.
Playback From x Seconds ago: If this setting is "x"
seconds, and if the user presses the Play front-panel
button (or clicks on the Playback icon), the DVR will begin
playing back footage from exactly "x" seconds ago. Choose from 60 to 3600 seconds.
5.4 ALARM & EVENT
On the right is a screenshot of the ALARM & EVENT
SETTING MENU. This menu will guide you through alarm
and event setup.
5.4.1 Alarm
Alarm: Select the number of the alarm input via which the
alarm device is connected to the DVR (1~16). This number
should ideally correspond with the number of the device's
"Active Camera", as described below.
Enable: Check this box to enable a response to alarm
triggers experienced by the alarm device selected above.
Log: Check this box to record alarm events from the selected alarm device in the log.
Pre-alarm Record: Check this box to copy recorded footage to the hard disk from 5 seconds before the alarm event
triggered by this alarm device. This pre-alarm footage will be recorded from the feeds of all related cameras, as configured
in the Record field below. (This pre-alarm recording rate will follow the "Normal" frame rate setting)
Buzzer: Check this box to let alarm events from this alarm device activate the DVR's buzzer when the alarm event occurs.
Main Monitor: Use this to configure what happens on the main monitor display when this alarm device experiences an
alarm.
No change: No change on the main monitor display.
Full Screen: If this alarm device experiences an alarm event, the feed of the Active Camera (configurable below) will be
displayed in full screen on the main monitor.
Call Monitor: Use this to configure what happens on this monitor display when this alarm device experiences an alarm.
No change: No change on the call-monitor display.
Full screen: If this alarm device experiences an alarm event, the feed of the Active Camera (configurable below) will be
displayed in full screen on the call monitor.
Record: Click this to select which camera(s) will start recording in response to an alarm triggered by this alarm device.
Clicking this button will open a selection menu.
Input Type: Use this field to select the type of alarm trigger for this alarm device.
N.O.: Normal Open contact.
37
Advertisement
Table of Contents
