Front Panel - EverFocus PARAGON 264x1 User Manual

1.4 FRONT PANEL

Your primary interaction with this DVR will be through the Front Panel buttons and their corresponding buttons on the
included IR Remote Control. Take a moment to
them often.
1) USB 2.0 ports (front): For connecting
There's another USB port for connecting a USB mouse on the back panel. s another USB port for connecting a USB mouse on the back panel.
2) DVD+RW Burner.
3) Channel buttons 1~16: Press
4) Display: Press this button to cycle between the info display types
5) Seq: Press this button to enter the auto
The dwell time can be set in the
see "Section 5.8.2 Display Setting >
6) Zoom: Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch
Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch
zoom off.
7) Monitor: Press this button to switch
Press this button to switch between the main monitor and up to two call monitors.
this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just
remember to exit out of the setup menus before doing so. remember to exit out of the setup menus before doing so.
8) Search: Press this button to enter
"Search" section.
9) Copy: Press this button to enter
section.
10) Screen Layout: Press the type of layout you want for displaying your channel feeds.
DVR will be through the Front Panel buttons and their corresponding buttons on the DVR will be through the Front Panel buttons and their corresponding buttons on the
a moment to learn where the buttons are as the remainder of the manual will refer to
connecting USB flash drives to copy/archive video, or to
Press a channel button to display that channel in full-screen view.
to cycle between the info display types (channel and status bar
to enter the automatic sequence mode. This will show each channel feed in matic sequence mode. This will show each channel feed in sequence.
the "Display Setting" tab of the Menu. For more detail "Display Setting" tab of the Menu. For more details about this function, please
Display Setting > Main M/T SEQ".
to enter the Search Menu. For more detail about the Search fu
to enter the Copy Menu. For more details about the Copy fun
the type of layout you want for displaying your channel feeds. the type of layout you want for displaying your channel feeds.
are as the remainder of the manual will refer to
ain monitor and up to two call monitors. You can also press
4
, or to do firmware upgrades.
screen view.
status bar info).
Search function, please see the
Copy function, please see the "Copy"