EverFocus PARAGON 264x1 User Manual page 33

Cancel: Press this button to cancel all changes and return to the Smart Search submenu.
How to select a Motion Detection search area with the MOUSE:
1. Click on the editing screen to reveal the grid.
2. Decide what area you want to select and click on
the grid block at the upper left corner of the area
you want to select.
3. Click on the grid block at the lower right corner of
the desired area.
4. The rectangular area between these two grid
blocks will be selected. You can now add individual
grid blocks by double-clicking on them. If you click
once on a grid block it will turn red, which means if
you click on another grid block far away, all grid blocks in-between them will turn green (active).
5. Choose "Save & Back" to proceed.
How to select a Motion Detection search area with the Front-Panel buttons:
1. Scroll to the Grid Setting field and press the Enter key to open the Motion Grid Setup page.
2. Scroll on to the setup screen and press Enter to reveal the grid.
3. Decide what area you want to select and scroll to the grid block at the upper left corner of the area you want
to select. Use the control wheel's outer ring to scroll horizontally, and the inner disk to scroll vertically.
4. Press Enter to select that corner block. The block will turn red, indicating that the setup program is waiting
for you to click on an opposing block so that it can turn all the grid blocks in-between into green (selected)
blocks.
5. Scroll to the grid block at the lower right of the area you want to select. The rectangular area in-between will
turn red. Click Enter and the red area will turn green (selected).
6. Add other blocks to this area if required, or add separate areas.
7. Press the Menu/Esc button to exit the selection area.
8. Scroll to "Save & Back" and press Enter.
Click on the "Search" button to start searching. The search
results will be shown as a list of events (see the image on the
right).
Prev Page: Go to the previous page
Next Page: Go to the next page
Play: Play the selected file
Copy: Copy the selected file
26