Table 127 Syslog Logs - ZyXEL Communications p-334whd User Manual

Table 126 ICMP Notes (continued)
TYPE CODE
5
4
0
5
0
1
2
3
8
0
11
0
1
12
0
13
0
14
0
15
0
16
0

Table 127 Syslog Logs

LOG MESSAGE
<Facility*8 + Severity>Mon dd
hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
devID="<mac address last three
numbers>" cat="<category>
Appendix G Log Descriptions
DESCRIPTION
Source route failed
Source Quench
A gateway may discard internet datagrams if it does not have the buffer space
needed to queue the datagrams for output to the next network on the route to
the destination network.
Redirect
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
Pointer indicates the error
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
DESCRIPTION
"This message is sent by the system ("RAS" displays as the
system name if you haven't configured one) when the router
generates a syslog. The facility is defined in the web MAIN
MENU->LOGS->Log Settings page. The severity is the
log's syslog class. The definition of messages and notes
are defined in the various log charts throughout this
appendix. The "devID" is the last three characters of the
MAC address of the router's LAN port. The "cat" is the same
as the category in the router's logs.
P-334WHD User's Guide
269