Dhcp Server Advanced Screen; Figure 72 Dhcp Server Advanced - ZyXEL Communications p-334whd User Manual

P-334WHD User's Guide
Table 51 DHCP Server General
LABEL
Apply
Reset

9.3 DHCP Server Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC addresses. You can also use this screen to configure the DNS server
information that the ZyXEL Device sends to the DHCP clients.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyXEL Device's static DHCP settings, click Network > DHCP Server >
Advanced. The following screen displays.

Figure 72 DHCP Server Advanced

128
DESCRIPTION
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
Chapter 9 DHCP Server