Figure 63 Wifi Wan > Wifi; Table 44 Wifi Wan > Wifi - ZyXEL Communications p-334whd User Manual

P-334WHD User's Guide
Figure 63 WiFi WAN > WiFi
The following table describes the general wireless LAN labels in this screen.
Table 44 WiFi WAN > WiFi
LABEL
Enable
Wireless
To associate
with any
available WiFi
network
User Defined
SSID
Name(SSID)
Scan
Security Mode
Apply
Reset
114
DESCRIPTION
Click the check box to activate WiFi WAN.
Select this option to have the ZyXEL Device connect to any available wireless
network within range.
Select this option to have the ZyXEL Device connect to a wireless network with the
SSID you specified in the Name (SSID) field.
The SSID (Service Set IDentity) identifies the Service Set with which the ZyXEL
Device will associate. The ZyXEL Device and the access point (AP) must have the
same SSID.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
network with which the ZyXEL Device will associate. Alternatively, you can double-
click an SSID in the text box below to select that network.
Click this button to have the ZyXEL Device search for available wireless network
within transmission range. The SSID and signal strength are then displayed in the text
box above.
Use the same security settings as those on the AP with which you want to associate.
Note: The ZyXEL Device in WiFi WAN Router mode supports only
WEP encryption, WPA-PSK or WPA2-PSK.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to reload the previous configuration for this screen.
Chapter 7 WiFi WAN