Day/Night Shades; Mini Blinds; Roller Shades; Hide-A-Bed Sofa Or Sofa Sleeper - Jayco 2016 White Hawk Owner's Manual

SECTION 12-INTERIOR JAYCO TOWABLE
Rinse after cleaning by wetting a clean cloth in fresh water, wringing our any excess and
wiping the areas where the cleaner was used.
Day/night Shades: Clean with a mild cleaning solution using a sponge or paper towel.
Wipe down with water after cleaning and dry thoroughly before raising the shade. Do not
use spot remover, household cleaners or detergents to remove soiled spots, as these may
cause damage to fabric or loss of color from fading.
Mini Blinds: A simple dry rag may do the trick. If they're especially dirty, you can use
cold or warm water to clean them. But never use hot water.
Fill a spray bottle with water and a tiny amount of soap. Then spray a lint-free towel with
the mixture and use the towel to wipe down each slat. While cleaning, try not to bend the
slats. They can also be soaked in a bathtub to loosen up any debris so the slats can be
wiped down easily.
Roller Shades: Can be easily cared for by simply using soapy water or a mild cleaning
solution on spots. However try a small area first. Harsh household cleaners or detergents
may cause damage to fabric or loss of color. It is our recommendation to dust the rails and
fabrics of the shades on a regular basis. Shades should be kept in the closed or up position
when not in use, to maintain pleat retention and minimize dirt and soil build-up. Do not
store shades in the down position. This may cause some loss of pleat retention if the shades
are not operated on a consistent basis.
NOTE: If your recreation vehicle must be stored for an extended period of time, store
shades in the up position and cover your windows with additional protection (I.E. Cut out
cardboard).
Sofa
Your recreation vehicle may be equipped with one of the following sofa styles.

Hide-a-bed Sofa or Sofa Sleeper

The hide-a-bed sofa functions much the same as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove the seat cushions and pull the sofa back
towards you firmly and gently. Activate (or deflate) the air mattress (if so equipped) using
the supplied furniture manufacturer's instructions. To convert the hide-a-bed back into the
upright sofa position, reverse the process.
Jack Knife Sofa
The Jack Knife sofa functions much the same as a residential futon. To make the sofa in to
a bed, lift up on the bottom seat cushion and pull it towards you. The sofa back will drop
down to provide a sleeping surface. For additional comfort and to reduce fabric damage,
you may want to place a cover or air mattress (customer supplied) over the sofa when it is
in the sleeping position.
Trifold Sofa The Trifold Sofa offers very similar features to the traditional hide-a-bed.
The following illustrations detail converting the sofa into a bed.
2. Using the strap handle, pull
sleeping surface up, then out.
1. Remove tri-fold sofa pillows
and set aside
12-2