Sleep Setting - Daikin RY24PEV1K Service Manual

SiK401004_A

3.4.8 Sleep Setting

Sleep on: Press Function button under on-state of the unit into sleep function and then
Sleep off: During sleep on-state, press Function button into sleep function and then press
Sleep setting is shown as Fig.3.4.8:
Sleep setting is clear after power failure and then power recovery. There is not sleep
function in fan and auto mode.
Note: In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset
FUNCTION CONTROL
press Enter/Cancel button to turn on sleeping function.
Enter/Cancel button to turn off this function.
temperature will be increased by 1°C and 1°C in another 1 hour. After that, the unit
will run at this temperature. In heating mode, if the unit with sleep function has run
for 1 hour, the preset temperature will be decreased by 1°C and 1°C in another 1
hour. After that, the unit will run at this temperature.
Fig.3.4.8 Sleep setting
48