Table of Contents
Advertisement
5.8 Sleep Setting
Sleep on: Press Function button under on-state of the unit into Sleep function and then press Enter/Cancel
button to turn on sleeping function.
Sleep off: During sleep on state, press Function button into leep function and then press Enter/Cancel
button to turn off this function.
Sleep setting is shown as Fig.5.8:
Turn on the unit, without
turning on sleep function
Sleep
setting is clear
ed after power failure and then power recovery. There is no sleep function in fan and auto
mode.
Note:In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature will be
increased by 1°C and 1°C in another 1 hour. After that, the unit will run at this temperature. In heating
mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased by 1°C
and 1°C in another 1 hour. After that, the unit will run at this temperature.
English
S
Press "Function" button
into sleep function
Press "Enter/Cancel" button
to turn off sleep function
Fig.5.8 Sleep setting
Press "Enter/Cancel" button
to turn on sleep function
Press "Function" button
into sleep function
15
Advertisement
Table of Contents
