Dynamic Select Switch - Mercedes-Benz C-Class Operator's Manual

Setting the volume:
Press button :.
X
If you select the loudest setting, indicator
lamp lights up ;.
You can also adjust the position of the
exhaust flap using:
the DYNAMIC SELECT switch
R
( page 143)
Y
COMAND or Audio 20
R
Problems with the engine
You can find information about this in the
Digital Operator's Manual.

DYNAMIC SELECT switch

All vehicles (except Mercedes-AMG
and plug in hybrid vehicles)
Use the DYNAMIC SELECT switch to change
the drive program. Depending on the drive
program selected the following vehicle char-
acteristics will change:
the drive (engine and transmission man-
R
agement)
the suspension
R
the steering
R
DYNAMIC SELECT switch
the availability of the ECO start/stop func-
R
tion
the climate control
R
the climate control settings
-
the rear window defroster operation
-
period
the performance of the seat heating
-
Each time you start the engine with the
SmartKey or the Start/Stop button, drive pro-
gram C is activated. For further information
about starting the engine, see (
Push DYNAMIC SELECT switch : up or
X
down until the desired drive program is
selected.
The status icon of the selected drive pro-
gram is shown in the multifunction display.
In addition, the current drive program set-
tings are displayed briefly in the Audio 20 or
COMAND display.
In a few countries, the ECO start/stop
i
function is deactivated at the factory due to
the available fuel grade. In this case, the
ECO start/stop function is not available in
any drive program, regardless of the display
in the Audio 20 or COMAND display.
Available drive programs:
I Individual
Individual settings
S+ Sport Plus
Particularly sporty driving
characteristics
S Sport
Sporty driving character-
istics
143
page 139).
Y
Z