Mercedes-Benz C-Class Operator's Manual page 255

Hide thumbs Also See for C-Class:
Table of Contents

Advertisement

Reconnecting automatically
Audio 20/COMAND always searches for the
last connected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the system
searches for the mobile phone that was con-
nected before that one.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
To call up the telephone menu: press the
X
% button.
To show the menu bar: slide 6 the con-
X
troller.
Connect
Device: turn and press
To select
X
the controller.
The device list is displayed.
To select the desired mobile phone: turn
X
and press the controller.
The selected mobile phone is searched for
and connected if it is within Bluetooth
range and if Bluetooth
®
Only one mobile phone can be connected at
any one time. The currently connected mobile
phone is indicated by the # dot in the device
list.
You can only switch to another authorized
i
mobile phone if you are not currently mak-
ing a call.
De-authorizing (disconnecting) a mobile
phone
Mercedes-Benz USA, LLC recommends De-
authorization in Audio 20/COMAND and on
the mobile phone. Subsequent authorization
may otherwise fail.
To call up the telephone menu: press the
X
% button.
To show the menu bar: slide 6 the con-
X
troller.
Audio 20/COMAND operating system
To select
X
the controller.
To highlight the desired mobile phone in the
X
device list: turn the controller.
To select G: slide 9 the controller.
X
To select Deauthorize: turn and press the
X
controller.
A prompt appears, asking whether you
really wish to de-authorize this device.
To select Yes: turn and press the controller.
X
The mobile phone is de-authorized.
i
you should also delete the device name
Bluetooth
tooth
Using the telephone
Accepting a call
To select Accept: press the controller.
X
or
®
Press 6 on the multifunction steering
X
is activated.
wheel.
The call is accepted.
Further information on the functions you can
use during a call can be found in the Digital
Operator's Manual.
i
mand using the Voice Control System (see
the separate operating instructions).
i
ferred, it appears in the display. If the
phone number is saved in the phone book,
the contact's name is also displayed. If the
phone number is withheld,
shown in the display.
Connect
Device: turn and press
Before re-authorising the mobile phone,
from your mobile phone's Blue-
®
list.
You can also accept the call by voice com-
If the phone number of the caller is trans-
253
MB
Unknown
is
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents