Steering Wheel; Mirrors; Memory Function - Mercedes-Benz C-Class Operator's Manual

Hide thumbs Also See for C-Class:
Table of Contents

Advertisement

The system automatically switches off
approximately 20 minutes after it is set to
level 1.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock (
page 137).
Y
To switch on: press button : repeatedly
X
until the desired heating level is set.
To switch off: press button : repeatedly
X
until all the indicator lamps go out.
If the battery voltage is too low, the seat
i
heating may switch off.
If drive program E is selected (see Digital
i
Operator's Manual), the power of the seat
heating is reduced.
Problems with the seat heating
You can find information about this in the
Digital Operator's Manual.

Steering wheel

Important safety notes
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
adjust the driver's seat, head restraint,
R
steering wheel or mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G
WARNING
Children could injure themselves if they
adjust the steering wheel. There is a risk of
injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.

Memory function

The electrically adjustable steering wheel can
still be adjusted when there is no key in the
ignition lock.
Information in the Digital Operator's
Manual
In the Digital Operator's Manual you will find
information on the following topics:
Adjusting the steering wheel
R
Steering wheel heating
R
EASY-ENTRY/EXIT feature
R

Mirrors

In the Digital Operator's Manual you will find
information on the following topics:
Rear-view mirror
R
Exterior mirrors
R
Automatic anti-glare mirrors
R
Parking position for the exterior mirror on
R
the front-passenger side
Memory function
In the Digital Operator's Manual you will find
information on the following topics:
Storing settings
R
Calling up a stored setting
R
113
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents