Mercedes-Benz C-Class Operator's Manual page 313

loss of pressure, a corresponding warning
message will appear in the multifunction dis-
play.
You can recognize the tire pressure loss warn-
Run Flat Indicator Active
ing by the
Press 'OK' to Restart
Service
appears in the menu of the multi-
function display. Information on the message
display can be found in the "Restarting the tire
pressure loss warning system" section
( page 311).
Y
Important safety notes
The tire pressure warning system does not
warn you of an incorrectly set tire pressure.
Observe the notes on the recommended tire
pressure ( page 307).
Y
The tire pressure loss warning does not
replace the need to regularly check the tire
pressure. An even loss of pressure on several
tires at the same time cannot be detected by
the tire pressure loss warning system.
The tire pressure monitor is not able to warn
you of a sudden loss of pressure, e.g. if the
tire is penetrated by a foreign object. In the
event of a sudden loss of pressure, bring the
vehicle to a halt by braking carefully. Avoid
abrupt steering maneuvers.
The function of the tire pressure loss warning
system is limited or delayed if:
snow chains are mounted on your vehicle's
R
tires.
road conditions are wintry.
R
you are driving on sand or gravel.
R
you adopt a very sporty driving style (cor-
R
nering at high speeds or driving with high
rates of acceleration).
you are driving with a heavy load (in the
R
vehicle or on the roof).
Restarting the tire pressure loss warn-
ing system
Restart the tire pressure loss warning system
if you have:
changed the tire pressure
message which
R
changed the wheels or tires
R
mounted new wheels or tires
R
Before restarting, make sure that the tire
X
pressures are set properly on all four tires
for the respective operating conditions.
The recommended tire pressure can be
found on the Tire and Loading Information
placard on the B-pillar. Additionally, a tire
pressure table is attached to the fuel filler
flap. The tire pressure loss warning system
can only give reliable warnings if you have
set the correct tire pressure. If an incorrect
tire pressure is set, these incorrect values
will be monitored.
Also observe the notes in the section on tire
X
pressures (
Make sure that the SmartKey is in position
X
2 in the ignition lock (
Use ò on the steering wheel to call up
X
the list of menus.
Press 9 or : on the steering wheel
X
to select the
Press the a button.
X
Press 9 or : to select
X
sure.
Press the a button.
X
The
'OK' to Restart
multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The
appears in the multifunction display.
Press 9 or : to select Yes.
X
Press the a button.
X
The
message appears in the multifunction dis-
play.
Tire pressure
page 307).
Y
page 137).
Y
Service
menu.
Run Flat Indicator ActivePress
message appears in the
Tire Pressure Now OK?
Run Flat Indicator Restarted
311
Tire Pres
message
Z