Mercedes-Benz C-Class Operator's Manual page 122

Replacing bulbs
120
Replacing front bulbs (vehicles with
halogen headlamps)
Removing and installing the cover in the
front wheel housing
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
X
stops using a suitable object.
Cover ; is released.
Fold cover ; upwards.
X
To install: insert cover ; into the left,
X
right and two lower catches.
Turn rotary knob : 180° inwards until it
X
stops using a suitable object.
Cover ; is locked.
Low-beam headlamps
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and remove it.
Turn bulb holder ; counter-clockwise and
X
pull out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.
High-beam headlamps
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and remove it.
Turn bulb holder ; counter-clockwise and
X
pull out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
X
right.