Mercedes-Benz C-Class Operator's Manual page 160

Charging the high-voltage battery (plug-in hybrid vehicles)
158
indicator lamp A on vehicle socket ?
flashes green slowly.
The vehicle must not be moved nor the
i
engine started during charging or when the
charging cable is connected.
Depending on the temperature, the fan
i
and battery cooling system may audibly
switch on during the charging process.
Removing the charging cable
When the condition of charge display reaches
100% in the multifunction display, the battery
is fully charged.
When the battery is fully charged:
Unlock the vehicle.
X
Indicator lamp A on vehicle socket ?
lights up green.
Press and hold button B on the charging
X
cable connector and remove the charging
cable from the vehicle socket.
Close socket cap =.
X
Close charge socket flap :.
X
Charging the high-voltage battery at
the charging station
The connection for the vehicle at a charging
station is identical to the connection on a
wallbox. Read the "Charging a high-voltage
battery at a wallbox" section (
Before beginning the charging process at a
charging station without communication
capabilities, you must first activate the sta-
tion. You can do this by using an RFID card or
via telephone activation. Observe the on-site
operator instructions for the charging station.
page 157).
Y