Advertisement
that there may have been a blow to the doors or the
hatch areas.
2. Turn the ignition to the RUN position with the
proper key.
For
more information on customizing the features
mentioned here, see "Feature Customization" in
the Index.
Turning Off the Alarm
If you started the alarm by pressing the panic button on
the Remote Lock Control transmitter, you must either
push that button again or turn the ignition switch to the
RUN position to stop the alarm.
If the alarm is sounding due to the shock sensor or a
door or hatch opening, it can be turned off by either
turning the ignition switch with a proper key inserted or
by pressing any button on the Remote Lock Control
transmitter. If you use your Remote Lock Control
transmitter to silence the alarm, additional things will
happen depending upon which button you press.
Pressing the UNLOCK button will turn the
alarm off, will unlock the driver's door and
disarm the system.
0
Pressing the LOCK button will turn the alarm off,
keep the doors locked and keep the system armed.
0
Pressing the trunk symbol button will turn the alarm
off and will unlock and disarm the hatch only.
0
Pressing the panic button will turn the alarm off,
keep the doors locked and keep the system armed.
If the alarm is sounding because an incorrect ignition
key was used, press any button on the Remote Lock
Control transmitter to turn the alarm off.
The alarm will stop by itself after two minutes.
2-15
Advertisement
