Advertisement
J
2.
3.
4.
Start with the horizontal (left and right) headlamp
aim, Don't try to adjust the vertical (up and down)
aim first.
Check the horizontal aim for each headlamp and
adjust it
as
necessary.
Turn the horizontal aiming screw until the pointer is
lined up with the 0 (zero).
5. Now adjust the vertical aim. Check the vertical aim
6 . Turn the vertical aiming screw until the bubble in the
for each headlamp and adjust it as necessary.
level is centered at 0 (zero).
7. If the gage readings are not centered, repeat Steps 2
Try not to touch threaded parts other than the vertical
and horizontal aiming screws.
and 3.
6-42
Advertisement
