Advertisement
Finding a Station
Setting the Tone
AM-FM: Press the lower knob to get AM or FM. Your
selection will show on the display.
TUNE: Turn the lower knob to choose radio stations.
SEEK: Press the right arrow to tune to the next higher
station and stay there. Press the left arrow to tune to the
next lower station and stay there.
SCAN: Press this button to hear each station for
a
few
seconds. The radio will go to
a
station, stop for a few
seconds, then go on to the next station. Press SCAN
again if you hear something you like and want to stay
there. SC will appear on the display while scanning.
PUSHBUTTONS: The five numbered pushbuttons let
you return to your previously played stations. You can
set up to 10 stations (five AM and five FM).
1. Find the station you want by using TUNE.
2. Press SET. (The SET indicator will appear briefly on
the display.)
3. Press one of the five pushbuttons, within five
seconds. Whenever you press that numbered button,
the station you set will return.
4. Repeat the steps for each pushbutton.
BASS: Press the up arrow to hear more bass and the
down arrow to hear less bass. Press the center of the
button for the factory-preset position. BASS will appear
briefly on the display whenever BASS is pressed.
TREB: Press the up arrow to hear more treble and the
down arrow to hear less treble. Press the center of the
button for the factory-preset position. TREB will appear
briefly on the display whenever TREB is pressed.
Adjusting the Speakers
BAL: Turn the control behind the upper knob to adjust
the sound between the right and left speakers.
FADE: Turn the fade control behind the lower knob to
move the sound between the front and rear speakers.
Playing a Compact Disc
Insert a disc partway into the slot, label side up. The
player will pull it in. The disc should begin playing.
3-10
Advertisement
