Advertisement
Windshield Wipers
You control the windshield wipers by turning the band
with the wiper symbol on it.
For
a single
wiping
cycle, turn
the
band
to MIST.
Hold
it there until the wipers start, then let go. The wipers will
stop after one cycle. If you want more cycles, hold the
band on MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer to LO, the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the LO position.
For
high-speed wiping,
turn the band further, to HI. To stop the wipers, move
the band
to
OFF.
Damaged wiper blades I'niiy prevent you from seeing
well enough to drive safely. To avoid damage, be sure to
clear ice and snow from the wipers blades before using
them. If they're frozen to the windshield, carefully
loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
2-45
Advertisement
