Advertisement
Setting the Tone
BASS: Press the up arrow to hear more bass and the
down arrow to hear less bass. Press the center of the
button for the factory-preset position. BASS will appear
briefly on the display whenever BASS is pressed.
TREB: Press the up arrow to hear more treble and the
down arrow to hear less treble. Press the center of the
button for the factory-preset position. TREB will appear
briefly
on
the display whenever TREB is pressed.
Adjusting the Speakers
BAL: Turn the control behind the upper knob to adjust
the sound between the right and left speakers.
FADE: Turn
the fade control behind the lower knob to
move the sound between the front and rear speakers.
Playing a Compact Disc
Don't use the mini-discs (three-inch singles). They
will eject, but they won't play. Use only full-size
compact discs.
Insert a disc partway into the slot, label side up. The
player will pull it in. The disc should begin playing.
If you're driving on a very rough road or if it's very hot,
the disc may not play and ERR (error) may appear on
the display. Press RECALL to take ERR off the display.
When things get back to normal, the disc should play. If
the disc comes out, it could be that:
0
The disc is upside down.
0
It is dirty, scratched or wet.
0
It is very humid. (If so, wait about an hour and
try again.)
RCL: Press this button to see which track is playing.
Press it again within five seconds to see how long it has
been playing. The track number will also appear on the
display when you change volume or when a new track
starts playing.
COMP: Press this button to maKe loud and soft
passages more nearly equal in volume. COMP will
appear on the display.
RDM: Press this button to hear the tracks in random,
rather than sequential, order. RDM will appear on
the display. Press this button again to return to
normal sequence.
REV: Press and hold this button to return to a
previously played passage rapidly. Release the button
to play the passage. The counter reading will appear on
the display.
3-16
Advertisement
