Advertisement
Checking Brake Fluid
You can check the brake fluid without taking off the cap.
Just look at the brake fluid reservoir. The fluid level
should be above the plastic seam in the reservoir. If it
isn't, have your brake system checked to see if there is
a leak.
What to Add
When you do need brake fluid, use
only
DOT-3 brake
fluid
--
such as Delco Supreme 11
@
(GM Part
No.
1052535). Use new brake fluid from a sealed
container only, and always clean the brake fluid
reservoir cap before removing it.
cAU'
1 u
With the wrong kind of fluid in your brake
system, your brakes may not work well, or they
may not even work at all. This could cause a
crash. Always use the proper brake fluid.
After work is done on the brake hydraulic system, make
sure
the level is above the plastic seam, near the base of
,
the filler neck.
6-34
Advertisement
