Advertisement
PUSHBUTTONS: The four numbered pushbuttons let
you return to your previously played stations. You can
set up to 14 stations (seven AM and seven FM).
1. Find the station you want by using TUNE.
2. Press SET. (The SET indicator will appear briefly on
the display.)
3. Press one of the four pushbuttons, within five
seconds. Whenever you press that numbered button,
the station you set will return.
4. Repeat the steps for each pushbutton.
In addition to the four stations set
as
above, up to three
additional stations may be preset
on each
band by
pressing two adjoining buttons at the same time. Just:
1. Tune in the desired station,
2. Press SET. (The SET indicator will appear on
the display.)
3. Press any two adjoining pushbuttons at the same
4. Whenever you press the same buttons, the station
time (within five seconds).
you set will return.
Setting the Tone
BASS: Slide the lever
up
to hear more bass.
TREB: Slide the lever up to hear more treble. Slide the
lever down to reduce noise if a station is weak or noisy.
Adjusting the Speakers
BAL: Turn the control behind the upper knob to adjust
the sound between the right and left speakers.
FADE: Turn the control behind the lower knob to move
the sound between the front and rear speakers.
Playing a Cassette Tape
REVERSE: Press the SEEK arrow that is opposite of
the
lit direction arrow to reverse the tape. The tape will
rapidly reverse until STOP-EJECT is pressed lightly.
FORWARD: Press the SEEK arrow that is the
same as the lit direction arrow to advance the tape
rapidly. The tape will rapidly reverse until STOP-EJECT
is pressed lightly.
Advertisement
