Magnetron Current, Running And Transmission Time - JRC JMA-3910-4 Instruction Manual

7.1

7.1.2.8 Magnetron Current, Running and Transmission Time

This test is used to check the magnetron current by displaying the magnetron current bar.
1. Follow procedures 1 to 3 in subsection 7.1.2.1.
Procedures
The DIAGNOSTIC MENU appears.
The magnetron current bar, the totals of the running and transmission times are
displayed.
0.125 to 0.75nm
6 to 96 and 120 nm
Exit 2. Press the
The running time indicates the time when the power has been turned on and the transmission time indicates
the total time when transmission has actually been conducted.
Diagnostic Menu
DIAGNOSTIC MENU
Press an item number key.
0. PREVIOUS MENU
1. MEMORY TEST
2. KEY SWITCH TEST
3. SENSOR TEST
4. LINE TEST
5. ROM VERSION
6. ARPA STATUS
7. ERROR LOGGING
8.
9.
MAG. I.
RUNNING TIME
TX TIME
To close this menu, Press (SUB MENU) key.
RANGE 10kW
0 to 3 scales
1.5nm 1 to 4 scales
3nm 3 to 5 scales
4 to 5 scales
SUB
key.
MENU
90 HR
55 HR
7 – 7
25kW
1 to 3 scales
5 to 8 scales
5 to 8 scales
5 to 8 scales