Setting Antenna Height - JRC JMA-3910-4 Instruction Manual

7.5

7.5.2.4 Setting Antenna Height

Adjust by the radar scanner unit height. Be careful to select scanner unit antenna height as the selection
affects the effect of STC control.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
20m".
6. Press the
Exit 7. Press the
Maintenance Menu
MAINTENANCE MENU
Press an item number key.
0. PREVIOUS MENU
1. ANTENNA HEIGHT
2. SERIAL INPUT DEVICE
3. ANTENNA SWITCH
4. PARTIAL MASTER RESET
5. ALL MASTER RESET
6. INTERNAL SETTING to CARD 2
7. CARD 2 to INTERNAL SETTING
8. MEMOLIZE USER SETTING
9. RESTORE USER SETTING
To close this menu, Press (SUB MENU) key.
SUB
key to open the SUB MENU.
MENU
9
key twice to open the INIT SETTING #2 menu.
8
key to open the MAINTENANCE MENU.
1
key to select "ANTENNA HEIGHT".
1
key to select "UP to 5m", "5 - 10m", "10 - 20m" or "MORE
ENT
key to confirm the setting.
SUB
key.
MENU
UP to 5m 5–10m
2AXIS LOG HDG SENSOR
TRANSFER DISCARD
7 – 23
10–20m MORE 20m
RS232C