Setting Vector Mode; Vector Length (Vector Time) - JRC JMR-7230-S Instruction Manual

6.4.2.2 Setting vector mode

1
Click on the trail true/relative selector button in the other ship information window.
Each click switches track display mode between [T] and [R].

6.4.2.3 Vector Length (Vector Time)

The Vector Length of a target is proportional to its speed, and the vector time can be switched in a
range of 1 to 120 minutes.
The following figure shows an example in which the Vector Length is set to 6 min, and the tip of the
vector represents the target's position expected to reach 6 minutes later.
Future predicted
position
(6 min later in this
example)
Trail true/relative selector button
HL
Example of Vector Length
6-17
Current position
Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27