Displaying ／ Clearing Cpa Ring - JRC JMA-3910-4 Instruction Manual

3.3.23.11 Displaying ／ Clearing CPA Ring
Attention
This function is used to select whether the CPA ring is displayed or not.
The ring is displayed at the default setting.
In the true vector mode, the CPA ring is not displayed even when this function is set at "ON".
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
Exit 7. Press the
EPA
EPA
Press an item number key.
0. PREVIOUS MENU
1. VECTOR TIME
2. PLOT NUMBER
3. LIMITS CPA
TCPA
4. AUDIBLE WARNING
5. DISPLAY OF CPA RING
6.
7.
8.
9.
To close this menu, Press (SUB MENU) key.
SUB
key to open the SUB MENU.
MENU
3
key to open the RADAR #3 menu.
3
key to open the EPA menu.
5
key to select "DISPLAY OF CPA RING".
5
key to select "OFF" or "ON".
ENT
key to confirm the setting.
SUB
key.
MENU
0 MIN (0-60 MIN)
OFF ON
1.0 NM (0.1-9.9 NM)
15 MIN (1-99 MIN)
OFF ON
OFF ON
3 – 50
3.3
3