Deleting Track By Color (Using Menu) - JRC JMA-3910-4 Instruction Manual

3.6

3.6.5 Deleting Track by Color (Using Menu)

The function for clearing tracks by color using menus is available only in the plotter mode.
Among the stored tracks, only those in the specified color can be deleted. The intenal memory can be saved
by deleting unnecessary tracks by color. Be careful not to restore deleting data.
1. Press the
Procedures
2. Press the
3. Press the
(or press the
4. Press the
IN DISTINCTION COLOR menu.
5. Press the
(or press the
RADAR #4 menu.)
6. Press the
(or press the
7. Press the
8. After the display for confirming deleting appears, press the
delete the track or the
9. Press the
Exit
MODE
key to select plotter mode.
SUB
key to open the SUB MENU.
MENU
6
key to open the PLOTTER menu.
4
key to open the RADAR #4 menu.)
3
key to open the DISPLAY／DELETE OF TRACK／MARK
3
key to select "CLEAR OWN TRACK COLOR".
5
key to select "CLEAR OWN TRACK COLOR" on the
3
key to select deleting color.
5
key on the RADAR #4 menu.)
ENT
key to confirm the setting.
CLR
to cancel deleting.
SUB
key.
MENU
3 – 83
ENT
key to