• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server
5.2.2 Time Settings
Click "System Configuration" "Time Settings" and the following page will be displayed.
Object
• Enable NTP
• Server Name
• NTP Request Interval
• Local Time Zone
• Local Date and Time
5.2.3 Password Settings
Click "System Configuration" "Password Settings" and the following page will be displayed.
The Gateway IP address of WMC252-300.
Enter the DNS server. The default is 8.8.4.4.
Enter the DNS server. The default is 8.8.8.8.
Figure 5-35 Time Settings
Description
Enable it to support NTP (Network Time Protocol) for automatic time
and date setup.
Enter the host name or IP address of the time server if you wish.
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Select the time zone of your country/region. If your country/region is
not listed, please select another country/region whose time zone is
the same as yours.
Set the access point's date and time manually.
-61-