Table of Contents
Advertisement
If the result displayed is similar to
has failed.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
firewall software programs may block a DHCP request on newly installed adapters.
4.2 Starting Setup in the Web UI
It is easy to configure and manage the WMC252-300 with the web browser.
Step 1.
To access the configuration page, open a web browser and enter the default IP address
http://192.168.0.100 in the web address field of the browser.
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
letters. Then click the OK button or press the Enter key.
Figure
4-4, it means the connection between your PC and the AP
Figure 4-4 Failed result of Ping command
Figure 4-5 Login by default IP address
-30-
Advertisement
Table of Contents
