Table of Contents
Advertisement
Object
• Quality of
Service
• Type
• Local IP Address
• MAC Address
• Uplink BandWidth
(Kbps)
• Downlink
BandWidth (Kbps)
• Comment
5.1.20 SNMP
Click "Operation Mode" "AP Router" or "Wireless ISP" and then enter the "SNMP" by clicking the Setup
button next to it. This section allows you to configure the SNMP.
Object
• SNMP
• Read Community
• Write Community
• Trap IP 1
• Trap Community
Description
Enable or disable the QoS service.
Select QoS type IP Address or Mac Address.
The IP address segment which uses this QoS rule.
The Mac address which uses this QoS rule.
Set the maximum uplink bandwidth allowed by the listed QoS rules.
Set the maximum downlink bandwidth allowed by the listed QoS rules.
Set a name for the rule.
Figure 5-32 SNMP Settings
Description
Enable or disable the SNMP service.
Enter a Read Community name for verification with the SNMP manager
for SNMP Read requests.
Enter a Write Community name for verification with the SNMP manager
for SNMP Write requests.
Enter the Trap IP address.
Enter an SNMP Trap Community name for verification with the SNMP
manager for SNMP Trap requests.
-59-
Advertisement
Table of Contents
