Client; Figure 5-4 Basic Settings - Client - Interlogix WMC252-1W-1T-300 User Manual

• Advanced Settings
• Access Control

5.1.2 Client

Click "Operation Mode"  "Client" and the following page will be displayed. This section allows you to
configure the Client mode.
Object
• Regulatory Domain
• Network SSID
• Site Survey
• Enable Wireless
• Disable SSID Broadcasting
Enable Isolated
Press "Setup" for more configurations. Please refer to 5.1.8
Advanced Settings for more information.
Press "Setup" for more configurations. Please refer to 5.1.9
Access Control for more information.

Figure 5-4 Basic Settings - Client

Description
Select your domain from the list.
It is the wireless network name. The default SSID is
WMC252-300.
Click "Site Survey" to find the remote sites to associate.
Check it to enable Wireless function.
Check it to disable SSID broadcasting.
Check it to isolate each connected wireless clients so that they
cannot access each other.
-35-