• UPnP
• Syslog
• IGMP
5.2.5 Ping Watchdog
Click "System Configuration" "Ping Watchdog" and the following page will be displayed.
Object
• Ping Watchdog
• IP Address 1
• Ping Frequency
• Failed tries
• Action
Management page is checked, the LAN2 can supply passive PoE
power to the second WMC252-300.
Check to enable the UPnP function.
The UPnP feature allows the devices, such as Internet computers,
to access the local host resources or devices as needed. UPnP
devices can be automatically discovered by the UPnP service
application on the LAN. This option is only available in AP
Router mode.
Check to enable Syslog function.
Check to enable the IGMP Proxy function.
This option is only available in AP Router mode.
Figure 5-38 Ping Watchdog
Description
Enable or Disable this function.
Enter the IP address which pings every time interval
Set times from 10 to 999.
Select failed tries from 1 to 5.
System will reboot when failing to ping the IP.
-63-