Standard Pole Mounting; Figure 3-3 Connect The Poe Injector; Figure 3-4 Pole Mounting - Interlogix WMC252-1W-1T-300 User Manual

Step 3. Plug the power cord into the DC port and the other end into the AC socket. Then, plug the RJ45 cable
(as shown in picture 4 under Step 1) into the POE port of the PoE injector.

Figure 3-3 Connect the PoE injector

3.4 Standard Pole Mounting

Place the strap through the slots on the back of the WMC252-300 and then around the pole. Tighten the strap to
secure the WMC252-300.

Figure 3-4 Pole Mounting

-26-